Simple Tips On Leak Detection In Brighton MA

May 12th, 2015 | Posted by Sarah D. Holman in Plumbing Tip - (Comments Off on Simple Tips On Leak Detection In Brighton MA)

To be able to save more water at home, we need common knowledge on water leak detection in Brighton Boston MA. With that effort alone, not only do we help save the planet from wasting water, we lessen our expenses as well. It can be very costly having water leakage in your homes, so these little tips will help you a lot in managing this kind of circumstances.leak detection brighton boston MA

Check everything in your house for a hissing sound

Listen carefully and determine any water leaking through a hissing sound. This may indicate a problem with your pipes and hosts, so better check everything for any signs.

Install a water leak detection system

There are two types of systems which you could use to detect water leaks. One is the Passive Leak Detection Systems, which is a battery-operated device that sounds an alarm when its moisture sensor detects something wet. Another is the Active Leak Detection Systems, which will also sound an alarm, but it will also eventually shut off the source of water supply.

Other helpful tips

  • If your toilet keeps on flushing without anyone around, it could be a sign of leaking. You can also use food coloring to determine a leak in the bowl.
  • If your walls or floors near a water pipe appear to be discolored, then we can conclude that there is a leak in that area.
  • Check carefully the taps, hoses, and drip irrigations found in your garden.
  • If you notice a slightly higher bill in your water consumption, then try to check your concealed piping systems to see if there is any leakage occurring.

These are only some of the simple things you can do to immediately have leak detection in your homes. One small step could actually help you save money and resources far more than you could imagine. Call your reliable Brighton Boston plumber now.

, , , , , ,

Running Toilets in Prairie Village Kansas

May 4th, 2015 | Posted by Sarah D. Holman in Plumbing Tip - (Comments Off on Running Toilets in Prairie Village Kansas)

“Name one common toilet problem.”

“Running Toilets in Prairie Village KS”

running toilets prairie village kansas

Not only running toilets waste water, it also wastes energy and is money consuming. Here are some reasons and what you can do about it.

  • Problem: Rubber Toilet Flapper

The number one cause of this toilet problem is the rubber flapper found at the bottom of the tank. This rubber flapper can get snagged on the flush chain, caught on its hinge or can become old and brittle. All of these reasons will stop it from fitting properly. There are also times when the rubber toilet flapper doesn’t seal the tank at all.

Solution: Take the tank cover off, flush the toilet and focus on the flapper. If you notice that it’s stuck on something, remove it. If it is not seating properly, wipe out any gunk off and see if it will already work. If all else fails, try to find a replacement part from your local hardware store.

  • Problem: Float

Another likely cause is the float. Once it is set too high or waterlogged, it will let the tank fill until water runs over the overflow tube.

Solution:

Fixing this is easy. Simply adjust the toilet float level down so the water shuts off when it reaches about an inch below the overflow opening. You will notice however that not all toilet tanks are designed the same way. Others will require screws to adjust the float, while others have sliding spring clips, nevertheless, both are easy to figure out. If you see that the float has a leak and is full of water, a replacement from your local hardware store is necessary.

  • Problem: The Fill/Flush/Water/Tank Valve

Now if both the flapper and the float are working, then there is something wrong with the fill valve. Inside the tank is a water valve, functioning as the one which controls the water inlet for the refill cycle. When flushing, the water is released from the tank and if the valve is defective, the water will continue to flow. This symptom will normally cause leaks.

Solution:

Try cleaning the valve itself. It normally sits on top of the tall column you will see inside the water tank. To avoid any water geyser, turn the water off first. The valve may be clogged so a simple cleaning or light whacking will do. However, if the valve looks terribly rugged, then a replacement is probably what it needs.

However, if the valve looks terribly rugged, then a replacement is probably what it needs. For a hassle-free fix, give your local Prairie Village plumber a call.

, , , , ,

How To Shut Off Your Gas System In Burke Virginia

April 8th, 2015 | Posted by Sarah D. Holman in Gas System Installation and Maintenance | Plumbing Tip - (Comments Off on How To Shut Off Your Gas System In Burke Virginia)

gas system in Burke VirginiaMost homeowners don’t think of the importance of knowing how to switch off the Gas System valve.  Waiting until an actual home emergency to try and find your gas shutoff valve is a big mistake.  And this is simply because not knowing where it is or what to do when you find it can just add to the stress of the situation.  That’s why you should take the time to familiarize yourself with the gas system shut off valve. Knowing its location may just save you from total disaster. Some things are worth learning before it is too late, like knowing where the gas shutoff valve is in your home.  Sure, these valves are usually tucked away in the creepiest, darkest part of your home.  But when an emergency strikes, knowing where to go saves time and possibly even lives!

There are usually two types of shutoff valves that you might find in your home.  There are main or master valves that stop the flow of gas to your entire household, or supply valves that stop gas flow to certain appliances.   Let’s start with the main shutoff valve.  This is also commonly known as the street-side valve because it’s found just before the gas meter.  When the long side of the handle is parallel to the incoming gas line, then you know it is open and gas is flowing.  When it is turned a quarter of the way toward the incoming pipe, it is closed.  The street-side valve needs to be opened and closed with a wrench and professionals and gas companies often warn against homeowners operating these valves on their own.  There are professionals for a reason, so use them to avoid disaster!

The house-side valve is usually located where the first gas line enters the home but is always located before the first appliance.  You can tell which pipe transports the gas to the home by the color of it – these pipes are black.  These valves are smaller and easier to handle on your own, but it isn’t advised that you mess around with the gas systems in your home unless you absolutely have to.  In the event of an emergency, knowing where they are and how to switch them off is valuable, but always leave routine maintenance on them to the professionals.

Hopefully, I have clearly showed how to shut off your residential gas system in Burke Virginia. If problems arise, don’t forget to hire professional gas system repair services provided only by trusted and licensed plumbing contractors.

Watch this video on natural gas safety tips!

, , , , ,

The Homeowner’s Plumbing System Checklist

September 7th, 2014 | Posted by Sarah D. Holman in Plumbing Tip - (Comments Off on The Homeowner’s Plumbing System Checklist)

Miami plumber serviceI’ve had a chance to talk to with a few licensed Miami plumbers during their regular plumbing maintenance check.

They strongly advised that we keep an eye on leaks and stoppages. Here are three tips I learned during their visit:

  1. Ensure your overflow holes are open. Release flood openings when performing periodic checks for other problems and issues that might need to be serviced.
  2. Check any loosened tiles to see if they are indicative of water loss. Unfastened tiles are, in many cases, an indication of a drip. Therefore, check to see if the tile gives at all when you apply force against it. You can anticipate problems more effectively if you pay attention to your tiles in advance.
  3. If you see a water line coming out of the discharge tube when setting up your new water heating unit, take the time to hook up that tube. It is undoubtedly a pipe for re-circulation, a process that enables your water to remain warm with little waste.

I’ve tried neglecting a thing or two and ended up paying a LOT after. It definitely pays to be careful and have scheduled maintenance checks instead of waiting for the problems to worsen. Just my two cents!

Anyway, stay tuned for more helpful tips that I’ve gathered from expert plumbers themselves!

Speaking of plumbing, learn awesome water conservation tips!

,

Three Helpful Plumbing Tips From Local Plumber In Miami

September 3rd, 2014 | Posted by Sarah D. Holman in Plumbing Tip - (Comments Off on Three Helpful Plumbing Tips From Local Plumber In Miami)

drain pipe repairYou’ll find that unexpected issues seem to arise when coping with plumbing for your Dade County residence.  Some of these matters can be fixed with ease while others can be more complex.

Before calling local Miami contractors it is essential that you are educated on basic pipe maintenance so that the trouble can be addressed in a timely manner.

Here are three helpful tips I got:

1.  Regular maintenance is imperative if you wish to prevent future leaks.  A leak that is ignored may squander a big amount of water as much as a hundred fifty gallons per day!  Regular safeguarding can avoid wear and tear.

2.  Residential plumbing involves more skill than merely redirecting water from point A to B. Frequently, It is necessary to repair or clean water lines. You may encounter various issues,  big and small, but if these situations become too heavy to handle, then contact a plumbing professional to manage these for you.

3.  Based from experience, it’s better to be prepared than to resolve problems when they’re already there! Always check your plumbing for splits and leaks.  That means lesser expenses and lesser plumber visits. (*wink)

Check out the three no-nos of basic plumbing!

, ,